The Intern Development Program (IDP) is a comprehensive training program created to ensure that interns in the architecture profession gain the knowledge and skills required for the independent practice of architecture. The program is developed, maintained, and administered by the National Council of Architectural Registration Boards (NCARB) and is required by most U.S. architectural registration boards to satisfy experience requirements for licensure.
Contents |
In 1976, NCARB introduced the Intern Development Program (IDP) after working with the American Institute of Architects (AIA) throughout the 1970s to develop a more structured program for interns to ensure they were gaining the knowledge and skills necessary to practice independently. Administered by NCARB, jurisdictions gradually began adopting the program to satisfy their experience requirement.
Mississippi became the first state to require the IDP in 1978, and Arizona became the most recent in 2009. All 54 U.S. jurisdictions accept the IDP to satisfy their experience requirement.
Since 1976, the only significant change to the program came in 1996 when interns were required to record actual training units earned rather than the percent of time spent in each training area. The program has been monitored annually by NCARB’s Committee on the IDP, which has recommended other minor changes over the years based on interpretations of the current practice of architecture.[1]
In May 2009, NCARB announced the rollout of IDP 2.0, the most significant update to the program since its inception in the 1970s. IDP 2.0 more closely aligns the programs’ requirements with the current practice of architecture and ensures that interns acquire the comprehensive training that is essential for competent practice.[2]
IDP 2.0 was developed in response to the 2007 Practice Analysis of Architecture. In this study, almost 10,000 practicing architects completed an extensive electronic survey to identify the tasks, knowledge, and skills that recently licensed architects, practicing independently, need in order to protect the health, safety, and welfare of the public.
The updates have been rolled out in phases with first phase occurring in July 2009 and the final scheduled for April 2012.[3]
An individual seeking architectural licensure is referred to as an “intern.” All U.S. states and Canadian provinces prohibit the use of the word “architect” from any person not already licensed to practice architecture. Most states and provinces also prohibit any derivation of the work architect as well.
A supervisor is someone who reviews and directs the work of others and ensures that work is done within acceptable levels of quality. An IDP supervisor is the individual who supervises an intern on a daily basis. The IDP supervisor is required to certify that the information submitted on an experience report is true and correct.[4]
A mentor is a loyal adviser, teacher, or coach. An IDP mentor must be a registered architect who makes a long-term commitment to an intern’s professional growth. If possible, the mentor should not work in the same office as the intern, so that the intern can gain useful insight into the daily work experience.[5]
The first step to beginning the IDP is to establish an NCARB Record and IDP eligibility date. Interns are eligible to start earning credit for the IDP once they have graduated from NAAB/CACB-accredited degree program or have satisfied one of the following IDP eligibility dates:
In order to gain experience, interns must work under the direct supervision of an IDP supervisor in one of the NCARB approved work settings.[7]
All experience must be reported electronically to NCARB at least every six months through their electronic Experience Verification Reporting (e-EVR) system. Experience may be submitted more often, but NCARB will not accept experience older than eight months (six-months, plus a two-month reporting grace period).[8]
Interns must acquire 5,600 experience hours in specific experience areas and categories to complete the IDP. The experience requirement is:[9]
These requirements will be replaced with IDP 2.0 experience categories and areas in April 2012.
Training Area | Minimum Hours Required |
---|---|
Programming | 80 |
Site and Environmental Analysis | 80 |
Schematic Design | 120 |
Engineering Systems Coordination | 120 |
Building Cost Analysis | 80 |
Code Research | 120 |
Design Development | 320 |
Construction Documents | 1,080 |
Specifications and Material Research | 120 |
Document Checking and Coordination | 80 |
Additional Core Hours | 600 |
Total Category Hours | 2,800 |
Training Area | Minimum Hours Required |
---|---|
Bidding and Contract Negotiation | 80 |
Construction Phase – Office | 120 |
Construction Phase – Observation | 120 |
Additional Core Hours | 240 |
Total Category Hours | 560 |
Training Area | Minimum Hours Required |
---|---|
Project Management | 120 |
Office Management | 80 |
Additional Core Hours | 80 |
Total Category Hours | 280 |
Training Area | Minimum Hours Required |
---|---|
Professional and Community Service | 80 |
Additional Core Hours | 0 |
Total Category Hours | 80 |
Categories | Minimum Hours Required |
---|---|
Design and Construction Documents | 2,800 |
Construction Contract Administration | 560 |
Management | 280 |
Related Activities | 80 |
Elective Hours | 1,880 |
Total Hours | 5,600 |
These categories and areas are effective April 2012.[10] Interns must be employed in one of three experience settings to earn credit [11]
Experience Area | Minimum Hours Required |
---|---|
Programming | 80 |
Site and Building Analysis | 80 |
Project Cost Feasibility | 40 |
Planning and Zoning Regulations | 60 |
Total Category Hours | 260 |
Experience Area | Minimum Hours Required |
---|---|
Schematic Design | 320 |
Engineering Systems | 360 |
Construction Cost | 120 |
Codes and Regulations | 120 |
Design Development | 320 |
Construction Documents | 1,200 |
Material Selection and Specification | 160 |
Total Category Hours | 2,600 |
Experience Area | Minimum Hours Required |
---|---|
Bidding and Contract Negotiation | 120 |
Construction Administration | 240 |
Construction Phase: Observation | 120 |
General Project Management | 240 |
Total Category Hours | 720 |
Experience Area | Minimum Hours Required |
---|---|
Business Operations | 80 |
Leadership and Service | 80 |
Total Category Hours | 160 |
Categories | Minimum Hours Required |
---|---|
1: Pre-Design | 260 |
2: Design | 2,600 |
3: Project Management | 720 |
4: Practice Management | 160 |
Elective Hours | 1,860 |
Total Hours | 5,600 |
IDP Guidelines: Produced by NCARB, the document is essential reading for interns, supervisors, and mentors participating in the IDP. It includes steps to completing the program, reporting procedures, training requirements, and core competencies interns should understand before becoming licensed. The document is updated about twice a year. IDP Guidelines
IDP Supervisor Guidelines: Guide is a reference designed to assist supervisors with their crucial role in their intern’s career. IDP Supervisor Guidelines
The Interns’ IDP 2.0 Rollover Guide: The rollover guide includes the rules on how experience will move from the current IDP to IDP 2.0. It also includes definitions, explanations of the experience areas that are combined or split, training hour rollover examples, and frequently asked questions. Interns’ IDP 2.0 Rollover Guide
IDP Coordinator Program: Provides information and guidance for completing the program to interns and students. There are three types of coordinators: